Digital Meter

XK3201T1 is a multipurpose weighing indicator, which is suitable for platform scale, weighbridge, volume scale, truck scale, and

Technical parameters:

Introduction  XK3201T1 is a multipurpose weighing indicator, which is suitable for platform scale, weighbridge, volume scale, truck scale, and crane scale.   Adopt the 21st century's latest Delta - sigma chip, to achieve high precision and speed conversion. It adds many new software functions based on XK3201T, such as four standard light-coupler input, KG/IB unit converting, peak/valley unit holding, delay switch for high and low limit.

Main Features :1,Adpot clear and stable LED2,Can independently adjust zero and full range3,A/D conversion rate is 120 times /s4,Can drive 6pcs sensors of 400ohm 5,display update rate can choose to 1,4,8,16 or 20 times/s6,Automatic repayable reset circuit       7,Standard high/low limit compare output port. 8,can choose single material batching software9,All digital calibration and function setting mode10,,With external switch protection for calibration and function setting11,can choose back zero range 12,Tracking and hold A/D conversion mode 13,Can control analog keys by RS232 or RS485 14,Provide digital filtering for various environments 15,Can choose kg or tons  16,standby 4~20mA analog output port

 

Performance index

Analog signals section

Sensor voltage	DC10V(plus-minus 0.05% )
Sensor current	120mA(Up to four 350ohm load cells can be connected in parallel)
Sensor wire	standard 4-wire or 6-wire
Analog signal input sensitivity	0.3uV/count
Accuracy	Zero drift<0.1uV(compare with input) Gain drift :10ppm
Zero  adjustment  range	0.0~about 2.0mV/( digital adjustment)
Amplify  adjustment  range	0.3~about 2.0mV/V(digital adjustment)
Non-linearity	0.01%FS  within
Conversion rate	120 times/sec
Resolution	24 bits
Min indication resolution	1/10000,1/40000(highest-level)

Display section

Display tube	LED
Digital display	6 bits,18mm height;
Weight display	5 bits
Unit	g,kg,t option
Decimal point	0, 0.0, 0.00, 0.000, 0.0000 option
Max weight	5 bit (50000)
End bit min resolution	1,2,5 option

General Specification

Power input	AC220V(+10%~-15%)50/60HZ
Power consume	About 10W
Operation temperature	-20 ~+50
Storage temperature	-40 ~+80
Humidity	<80%RH(non-condensing)
Volume	96W*48H*140D mm
Cut-out size	92W*46H mm
Weight	about 0.6kg.